TABLE OF CONTENTS

Internal Jira Reference

https://globalomnichannel.atlassian.net/browse/WA2-538


M3 settings

No specific M3 settings

MMS850MI_AddReclass for non lot controlled items and

MMS850MI_AddRclLotSts for lot and expiry dated items

MMS235MI_Update to update the manufacturing date  

MA settings


Process flows

MA support reclassification of both lot and expiry managed balance IDs as well as non-lot controlled balance ID’s.


  1. Reclassification
    • Full access to all status and allocable values as well as all dates in the lot master
    • This reclassification  is done on lot 
  2. Recl. Concession
    • Only allows status 3 balance ID's with an expiry date of today or earlier (reclassified over night, past midnight) to be reclassified to tomorrows date and status 2. 
    • Note: This is a F&B specific function that is recommended that only quality trained staff has access to. This function supports the action of M3 automatically reclassifying (Set up in Planning policy - MMS037) at end expiry or sales date and for an authorised human to manually override if the ingredients are still OK to cook with.
    • This is done on lot level
  3. Recl. Reject
    • This only allows stock in status 2 to be set to status 3, no date changes. This is a function every body can have access to to be able to flag goods as non usable for various reasons. Note: once set to sts 3 a user with better access needs to put it back if deemed OK - by using M3 or the full reclassification function.
    • This reclassification is done on balance ID level
  4. Recl. Inspect
    • Same as Reject but status 2 to 1 instead
    • This reclassification is done on balance ID level
  5. Recl. Hold
    • This only allows the user to put the stock to "Hold" which means that the allocable flag is set to 0. Note: this function also allow the user to set it back to allocable 
    • This reclassification is done on balance ID level


Limitations

Non lot controlled items cannot be updated in the reclassification program. However we can use the 

  • Recl reject
  • Recl inspect
  • Recl hold

to set status tp 1 or  3 or allocatable = 0/1

to set the status back to 2 - M3 must be used for Non lot controlled items. - No support for this at this stage.


Instructions

Location 



 
Location must be entered

Item/Lot/Container:
Input can be typed in or a GS1 barcode can be scanned in.


0114434567001829310200172310R20220809195802743
(01)14434567001829(3102)001723(10)R20220809195802743

Note: 
The status must be 2 for us to allow to set to 3 - Reject 
There is nothing to change here:
The function will default to Status 3 - Reject

If the user confirms it will set this in M3 for this balance ID ONLY.